A. commands
1.Check IP
address using “ipconfig or ipconfig/all”
2.”ipconfig/release”
use to Delete IP Address.
3.”ipconfig/renew” use to renew IP address.
4.”nslookup”
Use to see the IP address of Website.
5.”Tracert”
Use to trace the IP address
6.”netstat
–n” Shows the protocol statistics and the current established TCP/IP connection
in the computer.
7.”Telnet”
use to
8.”arp –a”
use to see the connectivity as much as Computers are connected with us.
9.”mstsc.exe”
use to open the Remote desktop connection.
10.”ncpa.cpl”use
to open Network Properties.
11.”Hostname” Shows your computer name.
12.”FINGER” is used to retrieve the info. About a user on N/W.
13 .”Conf ” is used to
Netmeeting.
Create user on Physical or Server Machine
1.Go to my
computer then right click.
2.Go in
Manage option.
3.Local
user and Group.
4.User then
right click.
5.New User.
B. Make user From Administrator
1.Go to my
computer then right click.
2.Go in
Manage option.
3.Local
user and Group.
4.User then
right click.
5.Go in
Properties.
6.Member
Of.
7.Add
option.
8.In
Advance.
9.Find now
10.Apply
and OK.
C. TELNET
1.Right
Click on MY computerèGo to ManageèService and application èServiceè Telnet service on Automatically or ManuallyèSTART.
2.After
That go to RUN
3.IP
Address Of the Connected Machine.
4.YES
5.You will
have Access Remotely to Other Machine.
D. Allow
Remotly Connection
1.Go to MY
COMPUTERè Propertiesè Remote optionè Allow Remotly.
E. REMOTE DESKTOP CONNECTION
1. All
Programme .
2.AccessoriesèCommunicationèOR type mstsc.exe on RUN
3.Give IP
Address OF Connected Computer.
F. Manage Group
1.MY
ComputerèManageèLocal User and GroupèGroup
2.Then
Right Click and Create New Group.
G.How to Build Workgroup
1.MY
ComputerèPropertiesèChange SettingèGive the NameèDone
2.THEN My
Network PlaceèView Workgroup ComputerèOPEN PC
H.How to Build Proxy Server
1.Download
Proxy Server(e.g.CCPROXY 7.2).
2.Install
it.
3.Then Go
to Connected system.
4.Internet BrowserèToolsèOptionsèLAN SettingèGive IP Address of Server Machine and Port No..
5.DONE IT.
I.Send Msg
As an Administrator
1.Go to Control
PanelèAdministrative ToolsèServiceèMessengerèStart ServiceèOK
2.Now You
Can Send The Message to User.
J.Types Of Firewall
1.HostBase Firewall.
2.Application Firewall.
3.Straight Full Firewall.
K. HOW CAN FIREWALL ON
1. Runèncpa.cpl OR Network PropertiesèLAN PropertiesèAdvancedèSettingèON Firewall.
L.How To
Build Virtual Network Connection
1.Download
VNC From FileHippo.com or Any Other Site.
2.Install
it.
3.Install
VNC Server and Viewer For Administrator.
4.Install
VNC Server For User only.
5.DONE IT.
M.Disk Fragment
Statemnt.
Disk Fragment
is used to arrange the Data Properly and Improve the System Space.
Procedure.
1.
Go to Any
Drive(C, D, E, F)èPropertiesèToolsèDefragment NowèAnalyze Disk Then Defragment Disk.
Method II .
My ComputerèManageèDisk DefragmentèDefragmentèAnalyze Analyze Disk Then Defragment Disk.
